The "5IN-4OUT" card is an expansion module designed for use with the Guard Touch. The card has 5 inputs and 4 outputs. The outputs are relays with voltage free changeover contacts. Each relay is associated to a LED which indicates the status of the output. Each input can have one out of more than 30 command functions, while each output can have one out of more than 100 functions. The functions associated to each input and output can be programmed directly from the Guard Touch display or through the Guard Touch Software. This device is needed every time a generating set with a Guard Touch and a remote start is required.
FEATURESThe device is provided with 4 relays with voltage free changeover contacts. Each relay is associated to a LED which indicates the status of the output. The ""5IN-4OUT"" was designed to be installed on-board the genset. This board is an expansion module of the static outputs present on the Guard Touch controller.
ADVANTAGESA large number of configurations are possible. Each relay may have one out of more than 100 possible functions for remote monitoring of signals, warnings and alarms. Each of the 5 inputs can have one out of more than 30 command functions. This device allow the remote starting of Manual machines. Compact layout: 109x119x22 mm.
|Power supply||12 or 24VDC +/-15% Max 245mA|
|Outputs||4 voltage free changeover contacts|
|Max steady-state current on contacts||8 Amps|
|Max current on contacts during changeover||8A @ 125VDC, 8A @ 250VAC|
|Max contacts insulation voltage||250 VAC, 125 VDC|
|Fastening mode||On "C" shaped DIN guide|
|Optical outputs||4 relay status LEDs|